Odorless eco White color Water based Interior Wall Paint

 Interior Wall Paint is a kind of widely used water-based coating, mainly made from Synthetic resin emulsion and other additives. It can be used to decorate the interior wall and ceiling , with good performance in excellent hide coverage , beautiful appearance, easy application, environmental friendly, low cost, mould proof, alkaliprevention.

Main material: Acrylate copolymer emulsion

Color: white

Drying time: >30min (Touch dry)

2~4 hours( Recoating)

Scrubbing resistance: Good

Chemical resistance: Normal cleaner

Reference Dosage: 12~14 sq.m/kg/single layer coating (Actual dosage will be according to the condition of the base)

1) Wide coverage: High spread rate which will save paint consumption.

2) Good hiding power: The paint can achieve a smooth finish which can hide the small flaws, cracks and seams of the wall.
3) Easy handling: It can be easily applied with brush, roller, spray and fast drying speed.
4) Environmental friendly: No irritation and fresh odor.

5) Economical

6) Mould proof

7) Alkali prevention

Surface preparation:

1. Keep the base humidity <10%, PH<10

2. Remove all loose or powdery paint residue by brushing and scraping with a stiff fiber brush

3. Fill any minorcracks with an appropriate filler
4. Surface should be flat and smooth

Application weather condition:

Temperature >5 degree centigrade

Relativehumidity<85%

Maintenance time:

7 days/25 degree centigrade ( not less than 5 degree centigrade. It is suggested to expand the maintenance time to achieve better effect.

Application method: Brush/ Roller/ spray

Attentions:

1. Mix well after paint can is opened.

2. Read the specification before using.

3. Open the door and window to maintain good ventilation

4. Please completely flush the eyes with clear water in case of eye contact.

5. Do not allow children and animals go into the working area and keep out of reach of children.

6. Wear the protective equipment during working if allergic to the paint.

7. Cover the overflowing paint with sand or soil and do not pour the paint into sewer in case of blockage.

8. Apply with matching primer for best performance.
9. Stop application when temperature is below 10°C, or humidity over 85%.
10. To prevent hardening of the paint, the can should be closed during the interval of application. Thinned paint should not be poured back to the original can.